Duct Rodders
5/16" Python Rod
3/8"-16 End Fitting
30" Cage
7/16" Python Rod |
9/16" Python Rod |
MINI-COBRA®: Our Mini-Cobra rod /asp/includes
our 3/16" (5 mm) and 1/4" (6 mm) diameter rods used primarily for smaller duct sizes and shorter runs. The rod has the same flexibility and strength features of our Python rod and comes wound in 16" (406 mm) and 24" (610 mm) cages in 50' (25 m) to 600' (200 m) lengths. /asp/includes two male end fittings and two tapered
3/16" Mini-Cobra Rod |
1/4" Mini-Cobra Rod |
Series 53700 & 56200
5/16" & 7/16" dia. DETECTABLE DUCT RODDER
DCD Detectable Duct Rodders are available in 5/16" and 7/16" diameter rods. They are available in the same lengths as the regular rodders and are mounted in the same frames. The purpose of the Detectable rod is to be able to accurately locate existing ducting underground or to locate the position of a blockage within a duct.
Each DCD detectable Duct Rod unit is supplied with a terminal box mounted on the frame with male and female banana terminals for external hook up. Both sizes of rod have #22 Ga. copper wire down the center of the fiberglass core.
It is recommended that a Roller Guide (Series 57150) always be used in order to better make the connection between the end of the rod and the wall of the ducting. This is necessary in order to complete the circuit back to earth.
Any transmitter can then be hooked up to the terminal box with the second lead from the transmitter going to ground (spike into earth). Once switched on, the signal will be transmitted along the duct rod and a standard locator can then be used to locate the signal source from above ground.
DCD Also offers Stainless Steel adapters with a 1/4" NC male thread for attaching a Sonde unit to the Swivel Rod End.
Key Benefits
Copper wires run entire length of rod for continuous detection
Adapter available for most Sonde units
High quality rod
| 53700 | 56200 |
| size 5/16" |
size 7/16" |